Most heated pet products start life as a flat pad. This one starts as a bed: a bolster-walled pet bed whose sleeping surface is itself the heating element, driven through an in-line controller with three levels and a self-ending timer. For buyers assembling a pet-comfort range, the interesting specification work sits in three places — the printed heating layer, the controller logic, and a cord that has to survive the animal it serves. This brief walks through all three, using the artwork sheet as the reference point.

A Bed That Is Its Own Heating Element

The category's usual construction hides a heated pad beneath a normal bed, which means two products to source and a heat path with an air gap in the middle. Here the stack is integrated: the artwork's layer diagram (sheet 3 of the detail set) shows the heating element sitting directly beneath the sleep surface, inside the same upholstered body that carries the bolster rim. Heat does not have to cross a fabric shell before it reaches the animal.

For a product manager, that integration changes the conversation with a factory. You are not pairing a bed with a heater; you are specifying one article with an electrical system inside it. Everything downstream — the controller, the cord exit point, the washable cover, the non-slip base — is designed around that single body.

The Printed Graphene Layer, Explained

The heat source is a graphene-based element, and the artwork leans into it: the hero visual shows the honeycomb pattern glowing across the sleep surface, and the detail sheet lists a graphene honeycomb layer with rapid heat conduction as its first callout. Two practical properties follow from that choice, and both are visible in the spec sheet rather than in marketing copy.

First, an even spread. A printed film lays heat across the full panel instead of concentrating it around a wire loop, so a cat curled at the edge of the bed sits over the same warmth as one in the centre. Second, a fast response: the sheet's far-infrared callout describes gentle, even waves rather than a slow-soaking heat, which is what you want when the controller is switching levels during the day.

A note for the catalogue: the artwork states low-voltage safe operation, but no voltage figure is printed anywhere on the sheet. That is deliberate — the electrical numbers belong to the confirmed order, and the listing should say so rather than inherit figures from another model.

Three Levels, Two Buttons, One Timer

The controller is a compact in-line pod, and the close-up sheet shows its full face: a power button, a timer button, and two indicator columns. The left column marks 2H, 4H and 6H — timer positions that switch the bed off by themselves. The right column marks HIGH, MED and LOW — three heat levels.

That combination answers the two questions pet owners actually ask. How warm? Three levels, chosen with one press. What if I forget it's on? It isn't — the timer ends the session at two, four or six hours. A detail sheet adds a Constant position alongside the three levels, for owners who prefer the bed to hold steady warmth without a countdown.

USB power completes the picture: the cord terminates in a USB-A plug. The supplier sheet shows the plug plainly, and the listing keeps it factual — USB input, controller in-line, levels and timer as drawn.

A Cord Designed Around Teeth

The safety sheet is the one that retail buyers read twice, because pets chew. Its four callouts:

• Chew-resistant steel spiral cord — the cable runs inside a steel-coil jacket, so the first line of defence is metal, not plastic.
• Waterproof insulated junction — a sealed joint where the cord meets the bed, rated against moisture and short circuits.
• Anti-pull strain relief — a reinforced tail where the cable exits, so a tug on the wire does not translate into damage at the socket.
• Low-voltage safe operation — stated as drawn, with figures confirmed at order time.

The footer adds four more badges: flame-retardant wiring, short-circuit protection, a bend-proof junction, and pet-safe materials described as eco-friendly and pet approved. None of these claims needs embellishment; the sheet already says what a buyer needs to verify against the test sample.

Denim Shell, Zip-Off Cover, Dotted Base

The outer story is a denim-look polyester shell with an ergonomic bolster rim — a raised wall that gives pets something to lean against, and gives the bed the look of furniture rather than equipment. The material sheet lists the fabric as scratch-resistant, a fair claim to make about anything marketed to clawed customers.

Three more construction notes matter to retailers. The cover unzips and is removable and washable, which turns a hygiene objection into a one-line answer. The base carries a dotted non-slip finish and is specified as a waterproof layer in the four-layer diagram. And the whole stack — denim face, graphene element, high-density elastic cushion, non-slip base — is drawn as a single washable-bodied article, with the electronics exiting through the sealed junction.

Colourways and the Leather Patch That Carries Your Brand

The reference article ships in denim blue, and the programme sheet shows grey and khaki beige alongside it — the two artworks label the grey variant slightly differently (Warm Grey on one sheet, Charcoal Grey on the other), so the listing defers to the confirmed order for the exact shade name.

Branding is where this article earns OEM shelf space. The patch on the front of the bolster is a leather label, and the programme sheet offers it in multiple shapes — plain rectangle, paw, dog head, house — with embossing, debossing or printing. Beyond the patch: custom dimensions, fabric and colour schemes, a custom controller, and retail packaging with labels and manuals. The sheet states low MOQ and factory direct supply, with lead times to be agreed rather than promised in print.

What the Artwork Leaves Unnumbered

A deliberate word about the gaps. The sheet prints no bed dimensions for the L size, no voltage figure, no wattage, no temperature range, and no MOQ number. Every one of those blanks is a decision that belongs to the order, not to a brochure — sizes are cut to the market, electrical values are set per destination, and minimums are quoted against the specification.

The artwork itself carries the standing disclaimer: all dimensions and specifications are subject to final confirmed order. This listing adopts the same discipline, and treats the blanks as a feature of how the factory works rather than a hole in the story.

Retail Angles for a Bed That Looks Like Furniture

Positioning writes itself from the scene sheet: living-room floor, bedroom bedside, sunlit balcony, inside a pet crate. The article is drawn as a dog-and-cat bed first and a heater second, which widens the audience beyond the winter-gadget shelf.

Three angle notes for the range plan:

• Furniture-first framing — denim styling and a bolster rim let the bed sit in home-goods assortments, not only pet-specialist ones.
• All-day gentle warmth — the sheet's own words, suitable for senior-pet and kitten-season merchandising without drifting into health claims.
• Gift-season readiness — a zip-off washable cover and a branded leather patch make it a plausible gift SKU, and custom packaging completes that route.

Briefing SHEERFOND on a Bed Programme

SHEERFOND manufactures graphene and far-infrared heating products on an OEM/ODM basis, and this bed is a current reference article: SKU XF-PB001, quoted at USD 23.9–30 depending on specification. A briefing should cover the target market's plug and voltage expectations, the L-size dimensions (or a custom cut), colourway selection from the denim/grey/khaki set, patch artwork, and packaging.

Sample requests run through our contact page: confirm the specification, receive a matched sample, verify the controller behaviour and cord construction against the sheets above, then lock the order documents. The confirmed-order disclaimer is not hedging — it is how the factory keeps each destination market's electrical reality attached to its own paperwork.

Bed Questions, Answered Straight

Is the heating element removable?

No. The element is laminated inside the four-layer body, under the sleep surface. The cover unzips for cleaning; the element stays in the article.

Can the bed run without the timer?

Yes. The detail sheet shows a Constant mode alongside the 2H/4H/6H positions; owners choose between self-ending sessions and steady warmth.

What does USB power mean for runtime?

Runtime depends entirely on the USB source, which the order confirms. The artwork shows the plug and the controller; it prints no battery or runtime figures, so the listing follows suit.

Is it waterproof?

The sheet specifies a waterproof insulated junction, a non-slip waterproof base layer, and sealed construction at the cord exit. The listing repeats those layer-level claims and goes no further.

What can be customised?

Logo leather patch, dimensions, fabric and colour, controller, and retail packaging — per the programme sheet, with low MOQ stated and numbers confirmed at order.

Any medical claims for senior pets?

None. The article warms; it does not diagnose, treat or prevent any disease. Merchandising stays on comfort and construction.